Description
INSTALLATION DETAILS
Click to download and view the owner’s instruction manual using the Acrobat viewer. (Two pages with wiring diagrams).
See the Trollbridge24 FAQ for answers to common questions and to send us a technical question.
Features:
-
- Fully automatic, no switches or connectors to change
- Both batteries operate in parallel when not trolling
- The bottom battery can be used as a house or starting battery even when trolling
- The two trolling batteries do not have to be matched or balanced
- Compatible with Lithium-IRON-PHOSPHATE batteries
- A single output 12 volt charger will charge all batteries
- Works with minimal 2 battery systems or in conjunction with a house battery
- Can be conveniently located with the batteries
- Rated for 12 volt alternators up to 100 amps
- Rated for 24 volt trolling motors up to 85 amps. . . For use on 24 volt anchor winch, bow thruster, hydraulics etc..
- Green LED indicates 24 volt output active
- Nearly UNLIMITED warranty
- Charging is done at 12 volts so your motor never sees charging voltages
- Over 99% efficient – faster charge – no wasted power – no heating
- Waterproof – will operate submerged in salt water
- Ignition rated for explosive atmospheres
- No voltage drop so batteries reach full charge
- No voltage drop so motor gets full power
- No wasted power, no heat sink or cooling required
- No modification to alternator or 12 volt engine wiring
- Simple 5 wire basic installation
- Comes with all cables for basic hookup
- Draws no current when off – no on/off switch needed
- No diodes to burn out if accidentally shorted
- Withstands ambient temperature to over 175 F (80 C) for engine compartment mounting
- Compact, Only 4″ long including mounting tabs, 2″ wide, 1.5″ high (plus cables)